Filter
Top Products
EPSON PhotoPC 500
Use the EPSON PhotoPC 500 imaging software and the
EPSON Photo! TWAIN and Utility Driver to transfer pictures
to the PC; see the
EPSON
PhotoPC 500 User’s
Guide for
Windows
for instructions.
Note:
EPSON Photo! Twain and Utility Driver automatically chooses
the fastest speed that works with
your
operating system. If you get
an
~YYOY
message when you try to download
photos to the PC, the
camera’s port speed may
befaster
than the port speed configured for
your
PC. You can configure
the
camera for any of the following
port speeds:
115,200 (Windows 95 and NT)
57,600
38,400
19,200
Connecting the Camera to a Macintosh
Follow these steps to connect the camera to a Macintosh to
transfer pictures:
1.
Press on the arrows on the camera’s port cover and slide up
the cover. (If you have an EPSON PhotoPix LCD monitor
attached to the camera, tilt it up to expose the port cover.)
2.
Locate the Photo PC 500 cable. Line up the arrow on the
cable connector with the notch on the camera’s serial port,
as shown. Insert the connector.
3.
Attach the DB9 connector on the Photo PC 500 cable to the
DB9 connector on the Mac adapter cable; tighten the
screws.
EPSON PhotoPC 500 - 4
10/96
DB9
Attach to
\
Attach to
computer
DB9
connector
Photo PC
500 cable
4.
Connect the other end of the Mac adapter cable to either
the printer port or the modem port on your Macintosh.
5.
Turn on the camera and the Macintosh system. A line
appears at the bottom of the picture counter on the
camera’s control panel.
Note:
When the
camera is
connected to the
Macintosh, you cannot use
the
shutter button or any of the control buttons.
Use EPSON PhotoPC 500 imaging software and the EPSON
Photo! TWAIN and Utility Driver to transfer pictures to the
Macintosh;
see the EPSON PhotoPC 500 User’s Guide for
Macintosh
for instructions.
Note:
EPSON
Photo! Twain
and Utility Driver automatically chooses
the fastest
speed that works with
your
operating system. If you get
an
~YYOY
message when you
try to
download
photos to the
Macintosh,
the camera’s port speed may be faster than
the
port
speed configured for your Macintosh.
You can configure the camera
$Y
ax;6$;hejbllowing
port speeds:
38:400
19,200
Digital Camera