Filter
Top Products
EPSON PhotoPC 500
Attaching the Optional PhotoPix LCD
Follow these steps to attach the optional EPSON PhotoPix
LCD monitor to the camera:
Make sure your camera is turned off. Set the PhotoPix LCD
monitor’s mode switch to the OFF position.
Pressing on the arrow on the LCD inlet cover with your
thumb, slide the cover away from the camera. (Put the
cover in a safe place.)
Position the PhotoPix LCD monitor beside the camera. The
display should be facing you.
While holding the camera with one hand, carefully slide
the LCD connector into the LCD inlet. Make sure it is
firmly in place.
LCD
corm
Detaching the Optional PhotoPix LCD
Follow these steps to detach the PhotoPix LCD monitor from
the camera:
1.
Turn the camera off, and set the PhotoPix LCD monitor’s
mode switch to OFF.
2.
Place the camera on a flat surface with the back facing you.
3.
Holding the camera with your right hand, use your left
thumb to press the release button on the LCD connector.
release
4.
While holding down the button, carefully push the
PhotoPix LCD monitor away from the camera; do not pull
the monitor.
5.
Replace the LCD inlet cover on the back of the camera.
EPSON PhotoPC 500 - 6
Other Optional Accessories
You can increase the camera’s storage capacity by installing a
2MB or 4MB PhotoSparP
memory module, as described in
this table:
With 2MB
With 4MB
2MB internal PhotoSpan
PhotoSpan
Number of photos
memory A882401
A882411
At high resolution
30 65
100
At standard resolution
60 130
200
See the EPSON PhotoPC 500 User’s Guide
for instructions on
installing a PhotoSpan module.
You can connect the PhotoPC 500 to a standard electrical
outlet using the AC adapter (B867027) to save power when
transferring pictures to the Macintosh or PC, or operating the
camera from either system. The adapter does not charge the
camera’s batteries.
Optional 37mm video camcorder lenses or filters may also be
used for taking close-up, wide-angle and special effects
pictures. To attach a lens, screw it on the camera as shown:
Installing a PhotoSpan
TM
Memory Module
Before you install a PhotoSpan memory module, make sure
you download all the pictures in the camera to the computer,
then erase them from the camera and turn the camera off.
CAUTION:
PhotoSpan modules are sensitive
to static electricity
and easily
damaged. Ground yourself by touching a metal object before you
handle the module, and never touch the module’s metallic area.
Follow these steps to install a PhotoSpan module:
1.
Slide the memory module cover lock down to release the
cover.
10/96
Digital Camera