Filter
Top Products
Epson P-2000
10 - Epson P-2000 11/04
Copying Files to and From Your
Computer
You can connect the P-2000 to your computer using the
USB cable that came in the box. Your computer recognizes the
P-2000 as an external hard disk drive, and you can easily copy
files back and forth.
Note: You cannot copy files from a memory card in the P-2000
directly to your computer; you must first copy them to the P-2000 and
then to the computer.
You should use the AC adapter when you connect the P-2000
to your computer.
Note: If your computer uses Windows
®
98SE, you need to
install driver software before you connect the P-2000. See the
P-2000 Basics guide for instructions.
1. Connect the AC adapter to the P-2000 and plug it in.
Then turn on the P-2000 and your computer. Make sure
the Home screen is displayed.
2. Connect the USB cable to your computer. Then open the
USB connector cover and connect the other end of the USB
cable to the P-2000.
The PC peripheral mode icon is displayed briefly, then
the LCD turns off. (You can turn it on by pressing any
button.)
3. Select the
EPSON_PV drive on your computer. In
Windows, you may have to use My Computer to select the
drive.
From your computer, you’ll see an Albums folder and a
Cards folder (corresponding to Saved Data on the Home
screen). Do not change the names of these folders or any of
their subfolders.
To locate files in the Cards folder, you’ll need to open a
series of subfolders.
4. Copy files to the PC_DATA folder (within the Albums
folder) only. If you copy files to any other folder, the
P-2000 will not recognize the files.
The PC_DATA folder is one of the default albums on the
P-2000; you cannot rename or delete it or create an album
thumbnail for it.
Disconnecting the P-2000 From Your
Windows Computer
1. Click Unplug or Eject Hardware on the computer screen.
2. Turn off the P-2000 and remove the USB cable from your
computer.
Note: After copying files to a computer running Windows 98, you
may see a blue screen when you remove the cable. To avoid this,
turn the computer off before removing the cable.
3. Remove the USB cable from the P-2000.
Disconnecting the P-2000 From Your
Macintosh
®
1. Drag and drop the P-2000 icon to the trash.
2. Turn off the P-2000 and remove the USB cable from your
Macintosh.
3. Remove the USB cable from the P-2000.
Albums
PC_DATA Scenery Flower Travel
Album1 Travel2 New Album3
Photo Favorite Album4
PC_DATA
folder