Filter
Top Products
Epson P-2000
11/04 Epson P-2000 - 5
Using Memory Cards
The P-2000 has two memory card slots, one for
CompactFlash cards, and one for Secure Digital cards.
It supports the following types of memory cards:
❏ CompactFlash Type I and Type II
❏ Microdrive
™
(3.3 V)
❏ SD (Secure Digital)
❏ MultiMedia card (MMC V 2.1 or later), up to 512MB
If you have a CompactFlash adapter, you can also use the
following types of memory cards:
❏ Memory Stick
®
❏ SmartMedia
™
(3.3 V only)
❏ xD-Picture card
™
Caution: Make sure you follow all instructions included with your
memory card.
Never remove a memory card while the Access light is flashing.
Doing so may cause files to be lost or damaged.
Do not put labels or stickers on memory cards. The sticker may peel
off, preventing the card from being ejected and damaging the P-2000.
Avoid using or storing cards in direct sunlight, or in places that are
extremely hot, humid, or dusty.
Using the CompactFlash Card Slot
You can use Type I and Type II CompactFlash cards or
Microdrive cards in the
C/F Card slot.
Insert the memory card into
the slot with the back of the
card facing the LCD. Then
push the memory card all the
way into the slot.
Caution: Make sure you insert
memory cards in the correct
orientation. Otherwise, the card
and P-2000 may be damaged.
If you are using a CompactFlash adapter, put the card into the
adapter and insert the adapter into the slot.
To remove a card from the
C/F Card slot, first make sure the
Access light is off. Then press the eject button and pull out
the card.
If the button is not sticking out, press it once to pop it out,
then press it again to eject the card.
Note: If you are using a CompactFlash adapter, remove the adapter
from the P-2000; do not remove only the memory card.
Using the Secure Digital Card Slot
You can use Secure Digital or MultiMedia cards in the
SD Card slot.
Insert the memory card
into the slot with the back
of the card facing the
LCD. Then push the
memory card all the way
into the slot.
Caution: Make sure you
insert memory cards in
the correct orientation.
Otherwise, the card and
P-2000 may be damaged.
To remove a card from the
SD Card slot, first make sure
the
Access light is off. Then
press the top of the card to
make it pop out. Then pull it
out of the slot.
Back side
Back side