Filter
Top Products
1
• Place the arcade face up on a flat surface.
• With the smooth side of the slide facing down, fit the slide onto the
four pegs on the arcade.
Arcade
Slide
2
• Plug the slide connector into the arcade connector. Push firmly to be
sure the connectors are completely joined.
Hint: Do not force the connectors together. If you cannot join them
easily, turn one of the connectors over and try again!
Connectors
3
• Lift the slide slightly.
• Fit the retainers onto the pegs of the arcade-slide assembly.
• Insert four .625" screws into the retainers and tighten.
• Set this assembly aside.
Retainer
This product contains small parts
in its unassembled state.
Adult assembly is required.
CAUTION
Slide
Retainer
Assembly
3
WARNING
To prevent injury from falls:
• Use slide position for skilled walkers only.
• Keep product away from objects child
may fall on.
• Never leave child unattended.