Filter
Top Products
5
• Turn the open ball drop upside-down.
• Fit the open ball drop to the corner of the base-ramp assembly,
as shown.
Hint: You may want to prop up the end of the base-ramp assembly.
Open Ball Drop
6
• Insert two .625" screws into the open ball drop and tighten.
7
• Turn the other ball drop upside-down.
• Fit the ball drop to the corner of the base-ramp assembly, as shown.
Ball Drop
4
• Turn the ramp and base upside-down with the ribbed side up.
• Fit the base onto the pegs on the ramp.
• Insert five .625" screws into the base and tighten.
Base
Ramp
Assembly
4