Filter
Top Products
16
• Fit the ball wheel bracket onto the base, so that the end of the
support tube inserts through it, as shown. Push the ball wheel
bracket down firmly to “snap” it into place.
• Insert two .625" screws into the ball wheel bracket and tighten.
18
• Insert a small arch piece into the large arch piece. Push firmly to
“snap” into place.
19
• Insert a .625" screw into the arch and tighten. Repeat steps 18 and
19 to assemble the other arch.
Small Arch Piece
Large Arch Piece
Ball Wheel
Bracket
17
• Now, turn the assembly upside-down. Insert two .625" screws into
the base and tighten.
Assembly
7