Filter
Top Products
4.Volume Number
The volume or disk number of the current clip
recording or playback session is displayed in this
area of the LCD. For example, a display value of
“2-014” identifies a track as being on volume 2.
5.Track or Clip Number
This area displays the current clip or track number
being recorded or played back. For example, a
display value of “2-014” identifies a track as
being clip 14 on volume 2. If a track number has
an “*” immediately following it, that particular
track has been marker as a “Keeper” track. See
page 15 of this User Guide for more information.
6.Timecode/User Bit Display Mode
This identifies the display mode for timecode
or user bit values. Selections are:
• COUNTER - counts frames during record
or playback of the current clip only.
• REMAINING - counts down the number
of frames available (time) on a particular disk
during a record session. In a playback session,
this display shows the remaining time on the
current clip.
• DV NTSC (or PAL) - Displays the external
timecode value being generated by a
camcorder or other de
vice during a record
session. Timecode mode has to be set to EXT
TC for this function to operate (see page 26
of this User Guide). In playback mode, this
displays the embedded DV timecode value in
a particular track.
• UB NTSC (or PAL) - Displays the set user
bit value in a particular clip. A user bit value
must be added for this to displa
y (see page 27
of this User Guide).
• ABSOLUTE - Displa
ys an absolute timecode
value for the particular session (sum of all
COUNTER timecode on connected volumes).
This is mainly used when FS-3 is set to AV/C
mode and is being controlled by an external
FireWire device such as a computer.
7.Timecode or User Bit Value
Displays the timecode or user bit value of
display mode selected.
8. Current Disk Volume
Displays the current disk volume in relation to
available space.
9.Available Space on Volume
Displays the space in time available on the
current volume.
10. Soft Key One Function Display
Displays the current function related to Soft
Key one (left key on the top row of buttons).
This is typically the main soft key for opening
the FS-3 MENU and is also used as a ST
OP
k
ey during record and playback sessions.
11. Soft Key Two Function Display
Displays current function of Soft Key two
(middle key on the top row of buttons).
12. Soft Key Three Function Display
Displays current function of Soft Key three
(right key on the top row of buttons).
13. Folder Display
Displays folder that current clip is in. If blank,
clip is not in a folder
. If folder appears in
brackets (e.g. <2SCENE 2> ), the FS-3 PLAY
FROM menu is set to FOLDER LIST. See
page 21 of this User's Guide for more details.
FireStore FS-3 User Guide
PAGE 14