Filter
Top Products
FS-2/2E Studio DTE Disk Recorder User Guide
105
FS-2E Web Interface
4.2.4 Recorder Configuration
Use the Recorder Config form to set up the FS-2E recorder function.
The FS-2E provides the following Recording Settings:
For specific details about the parameters listed below, see
FS-2/2E Menus
and Functions
on page 30 and Using the FS-2/2E on page 85.
•
Input Select - Pick the type of input signal:
• Composite,
• YC,
• Component, default
• SDI,
• DV,
•
Record Mode:
To start recording, click on the
Record button.
To stop recording, click on the
Stop button.
• Normal, default
• Retro Disk,
• Retro Cache,
• Loop Record,
• Still,
• Time Lapse,
Failed to Change Value Please Try Again
The FS-2E detects if the selected input signal type is present. If the selected
signal is not online, the message Failed to Change Value Please Try Again
appears. Verify that the type of input signal and reset the Input Select field.