Filter
Top Products
Introduction
FS-2/2E Studio DTE Disk Recorder User Guide
14
1.9.2 Setting the Time and Date
Before using the FS-2/2E, use this procedure to set the time and date.
1. Select the Setup Menu.
2. Select SET DATE & TIME. The following screen appears.
3. Select SET DATE or SET TIME and press SEL to open the sub menu as
shown below.
4. Scroll from value to value using the FORWARD and BACK index
buttons.
5. Press and to scroll through digits in the value.
6. Press EXIT to return to the menu screen.
Regardless of the display, the file name always remains
YYYYMMDD-
HHMMSS.xxx
(Year-Month-Date-Hour-Minute-Second).
SET DATE
SET TIME
EXIT SEL
SYSTEM DATE
10/01/07
MM/DD/YY
| & |
MOVES CURSOR
EXIT
SYSTEM TIME
16:21:13
Hh:Mm:Ss
| & |
MOVES CURSOR
EXIT