Filter
Top Products
Reference
FS-2/2E Studio DTE Disk Recorder User Guide
112
5.1 Technical Specifications
5.1.1 Inputs/Outputs
Input/Outputs
Component - Y, Pr, Pb (3 x BNC in, 3 x BNC out)
SMPTE
• 100% white at 700mv with 300mv Sync
• 700mv Chroma levels (100% color bars)
• Setup default to OFF
• Chroma offset default to OFF
Betacam
• 100% white is at 714mv with 286mv Sync
• 4/3 Chroma boost to 934mv p to p
• Setup default to ON
MII
• 100% white is at 700mv with 300mv Sync
• Black to White range is restricted to 647mv (700-setup)
• Setup is ON
Sync (1 x BNC in, 1 x BNC out)
Composite (1 x BNC in, 1 x BNC out)
Monitor Video Out - Composite (1 x BNC)
General Composite Specifications
• Differential Phase 2 Degree maximum
• Differential Gain 2% maximum
• Hue Accuracy 1 Degree
• Signal/Noise Ratio Greater than 54 dB
• Bandwidth 5.5 MHz
• K Factor % @ 2T 1 % maximum
• Y/C Delay Less than 25 nS
• Subcarrier locking range 100Hz
• Subcarrier free-run frequency +/- 30 Hz
(NTSC or PAL Fsc deviation)
• Genlock Horizontal adjustment range +
4 uS
• Residual Subcarrier Less than 0.5 IRE
• SC Phase Less than 2 degrees
S-Video - Y/C (1 x 4-pin DIN in, 1 x 4-pin DIN out)
Levels Adjustments
• Video Gain - +/- 20% 2mv resolution
• Chroma Gain - +/- 20% 2mv resolution
• Setup ON
(adds 7.5 IRE, or 53mv to luminance channel)
OFF |(no change to luminance channel)
Serial Digital - SD-SDI (1 x BNC in, 1 x BNC out - conforms to the
SMPTE 259M standard)
• The FS-2E outputs embedded audio in the SDI output stream.
This feature is only available for the FS-2E.
Timecode (1 x BNC in, 1 x BNC out)
Balanced Audio (2 x XLR in, 2 x XLR out)