Filter
Top Products
41
2
USING A TV MONITOR
40
ERASING SINGLE FRAME
Switch off the camera and TV. Plug the A/V
cable (accessory) into the A/V OUT (audio-visual
output) socket on the camera.
Plug the other end of the cable into the
audio/video input socket on the TV. Then switch
the camera and TV on and take pictures or play
back images as you would normally.
●
!
If you connect the A/V cable during playback, you
will not hear the sound from the camera.
●
!
The image continues to be displayed on the LCD
monitor.
●
!
If you disconnect or reconnect the A/V cable while
the power is switched on, the sound may not be
output correctly.
●
!
If there is a power outlet available, connect the
AC-5V/AC-5VH AC Power Adapter.
●
!
If your TV has stereo audio input sockets, plug the
cable into the left (white) socket.
●
!
Refer to the instructions provided with your TV for
more information on audio and A/V input for your TV.
A/V OUT socket
Video(yellow)
Audio(white)
To terminals
1 24
Press the “d” or “c” button to display the image
to be erased.
Press the “MENU/OK” button to erase the
displayed image. When erasing is complete, the
next image appears and the “
™” message
is displayed.
●
!
To cancel single-frame erase, press the “BACK”
button to return to the menu. To exit the menu screen,
press the “BACK” button again.
●
!
If “¡” is displayed, the image protection
must be removed to erase the image (➡P.81).
●
!
If the “
º
” message is displayed,
DPOF is specified. When you press the “MENU/OK”
button, the image is erased and the DPOF settings
are updated.
3
To continue erasing images, repeat the
procedure from step .
3