Filter
Top Products
101
Viewing Images
6
4
Set the camera into the cradle.
1Set the “USB/PLAY” switch on the cradle to the
“PLAY” position.
2Press the “POWER” button on the cradle to turn
the camera on in Playback mode.
5
01
02
100
6.1.2 Connecting to a TV
6.1.1 Using the AC power adapter
Always use a FUJIFILM AC Power Adapter AC-5VW (included) or AC-5VH/AC-5VHS (sold
separately) (➡P.114).
Use the AC power adapter to avoid losing power at inconvenient times, such as when downloading
photographed images to the computer. You can take pictures and play back images without
worrying about depleting the battery.
●
!
See P.116 for notes on using the AC power adapter.
●
!
Only connect or disconnect the AC power adapter when the camera is turned off.
Connecting or disconnecting the AC power adapter while the camera is turned on temporarily interrupts the power supply
to the camera, so that images or movies being shot at the time are not recorded. Failing to turn the camera off first can
also result in damage to the xD-Picture Card or malfunctions during PC connection.
Check that the camera is turned off. Plug the AC
power adapter connector into the “DC IN 5V”
socket and then plug the AC power adapter into the
power outlet.
●
!
The socket-outlet shall be installed near the equipment and
shall be easily accessible.
●
!
The shape of the plug and socket-outlet depends on the
country of use.
DC IN 5V socket
6.1 CAMERA CONNECTION
6
Viewing Images
3
Video (yellow)
Audio (white)
To terminals
Plug the other end of the cable into the video input
socket on the TV.
●
!
Images are only sent to the TV in Playback mode.
●
!
When connecting the A/V cable to TV, the LCD monitor is
turned off.
●
!
A wide-screen TV is required to view images shot using the
“WIDE” setting in full.
●
!
Refer to the instructions provided with your TV for more
information on video input for your TV.
1
2
Plug the A/V cable (included) into the A/V OUT
(Audio/visual output) socket for cradle.
●
!
The camera can be connected to TV without cradle. Plug the
A/V cable (included) directly to the connection socket on the
camera.
01 02
1Plug the AC power adapter connector into the
“DC IN 5V” socket.
2Plug the AC power adapter into the power outlet.