Filter
Top Products
77
Settings
4
◆
To restore power to the camera
◆
When the Auto power off function (2 or 5 minutes
setting) has shut the camera down:
1 Close the lens cover briefly.
2 Re-open the lens cover completely.
To play back images:
1 Close the lens cover until it stops.
2 Hold down the “
w” button for about 1 second.
ON
When this function is enabled and the camera
remains unused for 2 or 5 minutes, it is turned off.
Auto power off function prevents leaving the power
on.
●
!
The Auto power off function is disabled during High-speed
shooting and Automatic playing back, and when a USB
connection is being used.
î
AUTO POWER OFF
AUTO POWER OFFA U T O P O W E R O F F
OFF
O F FO F F
OFF
OKO K
SETS E T
2 MIN2 M I N2 M I N2 MIN
OFF
O F F
5 MIN5 M I N5 M I N5 MIN
2 MIN
2 M I N2 M I N2 MIN
SET
S E T
1
3
2
ONO NO NON
When this function is enabled, you can save power
and get the maximum possible running time from
your battery.
The LCD monitor darkens when camera is not used
for 10 seconds.
Î
LCD POWER SAVE
2 MIN2 M I N2 M I N2 MIN
LCD POWER SAVEL C D P O W E R S A V E
OFF
O F FO F F
OFF
OK
O K
SETS E T
ON
O NO N
ON
OFF
O F FO F FOFF
SET
S E T
1
3
2
ONO NO NON
●
!
Pressing any other button as well as the shutter button wakes
the camera up.
●
!
The LCD power save function is disabled in High-speed
shooting mode and movie mode.
When the LCD monitor is dark, pressing the shutter
button down halfway recovers the LCD monitor
brightness.
76
h Optical zoom focal length
✽
Approx. 36 mm to 108 mm, max. zoom scale: 3×
h Digital zoom focal length
✽
Approx. 108 mm to 616 mm,
max. zoom scale: approx. 5.7×
h Optical zoom focal length („)
✽
Approx. 38 mm to 114 mm, max. zoom scale: 3×
h Digital zoom focal length („)
✽
Approx. 114 mm to 650 mm,
max. zoom scale: approx. 5.7×
✽ 35 mm camera equivalents
The position of the “ ” indicator on the
zoom bar shows the zooming status.
The area to the right of the separator
indicates digital zooming, while the area
to the left indicates optical zooming.
Zoom bar display
Optical zoom Digital zoom
Using the digital zoom allows you to enlarge your
subject and shoot it. However, it will lower your
image quality. Set the digital zoom when requiring it.
SET-UP
ê
LCD BRIGHTNESS
To adjust LCD monitor brightness:
1Press “d” or “c” to adjust the LCD monitor
brightness.
2Press the “MENU/OK” button to confirm the new
setting.
SETS E T CANCELC A N C E L
45
-
+3 2 1
0
1 2 3 4 5
Use this function to control the digital zoom.
When zooming changes between optical and
digital, the position of the “■” indicator stops. Press
the same Zoom button again to start the “■”
indicator moving again.
●
!
If the shot goes out of focus during zooming, hold the shutter
button down halfway to refocus the shot.
ë
DIGITAL ZOOM
DIGITAL ZOOMD I G I T A L Z O O M
OFF
O F FO F F
OFF
OKO K
SETS E T
2 MIN2 M I N2 M I N2 MIN
ON
O NO N
ON
OFF
O F FO F F
OFF
ON
O NO N
ON
SET
S E T
1
3
2
✽ How to use the SET-UP menu (➡P.72)
01 02