Filter
Top Products
32 33
2
MULTI-FRAME PLAYBACK
●
!
The LCD monitor text display disappears after
approximately 3 seconds.
●
!
Playback zoom cannot be used with multi-frame
playback.
In playback mode, the display shown on the
LCD monitor switches each time you press the
“DISP” button. Press the “DISP” button until the
multi-frame playback screen (9 frames) appears.
1Select a frame by using “d”, “c”, “a” and “b”
button to move the cursor (the orange box) to
the desired frame. Press the “a” or “b” button
several times to switch to the previous page or
the next page.
2You can enlarge the selected image by
pressing the “DISP” button again.
2
VIEWING YOUR IMAGES
(
PLAYBACK
)
Set the Mode switch to “Q”.
You can “d” and “c” button to move forward and backward
respectively through your images.
●
!
When you set the Mode switch to “Q”, the last image shot is
displayed.
●
!
If the lens is extended during playback, the camera retracts the
lens as a protective measure if the camera is not used for
approximately 6 seconds.
◆
Images That Can be Viewed on the FinePix F601 ZOOM
◆
Fast Forwarding Images
You can fast forward through the frames by holding down
“d” or “c” button for about 1 second during playback.
●
!
A progress bar is displayed to show the approximate
playback position on the SmartMedia.
01 02
No text displayed
Multi-frame playback
Normal playback
1
You can use this camera to view (excluding some uncompressed data) images recorded on an
FinePix F601 ZOOM or images recorded onto a 3.3V SmartMedia using a FUJIFILM FinePix
series, MX series and DX series digital camera.