Filter
Top Products
100 101
5
●
!
To exit this procedure without changing the settings,
press the “BACK” button.
When you select the LCD BRIGHTNESS or
VOLUME menu option, an adjustment bar
appears on the LCD monitor.
1Use “d” or “c” to adjust the LCD monitor
brightness or speaker volume.
2Press the “MENU/OK” button to confirm the
adjustment.
Once you enable this function, the monitor is
temporarily switched off to reduce power
consumption (Sleep mode) if the camera is not
used for about 30 seconds. If the camera is then
left unused for a further time (2 or 5 minutes), it
is automatically switched off. Use this function
when you want to get the maximum possible
running time from the battery.
When the camera is in sleep mode, pressing the
shutter button down halfway brings the camera
back to full operational mode. This is a useful
feature as it allows you to take pictures more
quickly than switching the camera off and then
on again.
●
!
Operation can also be restored by pressing buttons
other than the shutter button.
●
!
Auto Power Off is disabled when the camera is
connected to a USB port.
The Sleep function does not operate when
the LCD monitor is switched off or when the
camera is in Setup or Playback mode.
However, if the camera controls are not
used for some time (2 minutes or 5 minutes),
the camera automatically switches off.
1 2
01 02
g AUTO POWER OFF
SET–UP
g LCD MONITOR BRIGHTNESS/VOLUME
SET–UP