Filter
Top Products
CHARGING THE BATTERY
14
SWITCHING ON AND OFF
•
SETTING THE DATE AND TIME
15
Getting Ready
1
1
2
●
!
To set the date and time later, press the “BACK” button.
●
!
If you do not set the date and time, this confirmation
screen will appear each time you switch the camera on.
When you first switch the camera on, the date is
cleared. Press the “MENU/OK” button to set the
date and time.
3
4
1Use “d” and “c” to select Year, Month, Day,
Hour or Minute.
2Use “a” and “b” to correct the setting.
Once you have set the date and time, press the
“MENU/OK” button. Pressing the “MENU/OK”
button switches the camera to Photography or
Playback mode.
If the SET–UP screen reappears, press the
“MENU/OK” button again.
●
!
Once the AC power adapter has been connected or the
battery have been installed for a day or more, the
camera will retain the specified date and time for
approximately a day without power (with the battery
removed and AC power adapter disconnected).
●
!
If you hold down “a” or “b”, the numbers change
continuously.
●
!
When the time displayed passes “12:00”, the AM/PM
setting automatically switches.
01 02
1
Check that the camera is switched off. Plug the
AC power adapter connector into the DC IN 5V
socket on the camera and then plug the adapter
itself into the main power outlet.
2
Using the AC Power Adapter
Use the AC power adapter to avoid losing
power at inconvenient times, such as when
you are downloading photographed images
to your computer. Using the AC power
adapter also allows you to take pictures and
play back images without worrying about
depleting the battery.
h Compatible AC power adapters
AC-5VS/AC-5VHS/AC-5VH
●
!
Use only the FUJIFILM products listed left.
●
!
See P.78 for notes on using the AC power adapter.
●
!
Only connect or disconnect the AC power adapter
when the camera is switched off.
Connecting or disconnecting the AC power adapter
while the camera is switched on temporarily
interrupts the power supply to the camera, so that
images or movies being shot at the time are not
recorded. Failing to switch the camera off first can
also result in damage to the media or malfunctions
during PC connection.
If you disconnect the AC power adapter without
switching the camera off, the image on the LCD
screen may be disrupted. However, this is not a fault
and the image can be restored by switching the
camera off and then on again.
●
!
Charging times increase at low temperatures.
●
!
If the self-timer lamp blinks during charging, a
charging error has occurred and the battery cannot
be charged. If this occurs, see P.82.
●
!
Switching the camera on during charging interrupts
the charging.
●
!
You can charge the battery more quickly by using the
BC-65 Battery Charger (sold separately) (➡P.76).
●
!
The shape of the plug and socket-outlet depends on
the country of use.
DC IN 5V
socket
01 02
The self-timer lamp lights (red) and battery
charging begins. When charging is completed,
the self-timer lamp switches off.
h Full recharging times for completely depleted
battery
(at an ambient temperature of 23°C ±2°C)
NP-60: Approx. 3 hours
NP-120 (sold separately): Approx. 5 hours
Press the “POWER” button to switch the camera
on and off. When you switch the camera on, the
indicator lamp (green) lights.
If the “q/T” mode is selected, the lens cover opens
and the lens slides out. Avoid pressing on the lens
so as not to damage precision components.
Obstructing the lens will cause a malfunction or fault
and the “
µ”, “ß” or
“
´” message will appear. Take care also
not to get fingerprints on the camera lens as this will
result in impaired image quality in your shots.
✽ See P.68 for information on selecting the language.