FujiFilm S2700HD Series Digital Camera User Manual


 
30
2
Focus.
Press the shutter button halfway to focus.
3
Shoot.
Pictures will be taken while the shutter button is pressed. Shooting ends when the
shutter button is released, memory is full, or the selected number of shots has been
taken.
1 Notes
• Focus and exposure are determined by the  rst frame in each series. The  ash turns o automatically (pg. 27);
the previously-selected  ash mode is restored when continuous shooting is turned o .
• Frame rate varies with shutter speed.
• If the self-timer is used when L and N are selected, only one picture will be taken when the shutter button is
pressed.
• At a setting of J, white lines may appear in bright areas of the image; these can be avoided by choosing K
mode.
• The number of pictures that can be recorded depends on the memory available. Brack-
eting is only available if there is su cient memory for three pictures. Additional time
may be required to record pictures when shooting ends. In L, O, and I modes, pic-
tures are displayed in the monitor while recording is in progress.
STORINGSTORING
I Continuous Shooting (Burst Mode)