FujiFilm Z5 RED Digital Camera User Manual


 
116
Connecting to a PC
By connecting the camera to a PC, your system can be
expanded to fill a wide range of uses. Using
“FinePixViewer” performs images saving, browsing and
file management etc.
MEMO
We recommend connecting the camera when it has
sufficient battery charge remaining. If the power cuts out
during data transmission, the data will not be transmitted
correctly. Always use the AC power adapter when
connecting the camera to a PC.
CAUTION
Do not format the xD-Picture Card in the camera on
the PC.
Use the xD-Picture Card with images taken by a
FUJIFILM Digital camera.
When connecting to a PC, if the xD-Picture Card
contains large image or movie files, connection or
transmission may take time or images may not be
stored. In these cases, use the Image Memory Card
Reader (sold separately), etc.
AInsert the xD-Picture Card with images into the
camera (p.18).
CD-ROM
(Software for FinePix CX)
Refer to Software
Installation (p.110, 113)
the first time you connect
the camera to your PC.
Install the software first. Do
not connect the camera to
the PC before installing all
the software.
BConnect the camera to the PC with the supplied USB
cable.
CPress w for about 1 second to turn the camera on.