Filter
Top Products
42
Setting the Shooting Mode
You can select the most suitable setting according to the
subject by selecting one of the Shooting modes.
Setting Picture stabilization
(Anti-blur) and Natural & d
Press the “” ( ) button to set Picture stabilization
(Anti-blur) or Natural &
d.
The setting switches with each press of the button.
You can select Picture stabilization (Anti-blur) and
Natural &
d from the Shooting modes on the shooting
menu (
➝p.43)
When
Picture stabilization (Anti-blur) or Natural &
d is selected on the shooting menu, pressing the “”
(
) button switches between these two modes.
This mode can reduce both camera blur and subject blur
by increasing the shutter speed.
This mode shoots 2 images continuously without flash
and with flash. Shooting with flash allows you to take a
picture of a main subject brightly. Shooting without flash
produces beautiful images that retain the natural
ambience. This mode is useful for shooting 2 different
types of pictures at the same time.
When pressing the shutter button, first picture is taken
without flash and next picture is taken with flash.
Always 2 pictures are taken per 1 shot.
Do not move the camera until the shooting ended.
MEMO
This mode helps to avoid failed shots that may occur
when using other Shooting modes when taking a picture
against the sun, etc.
CHECK
Flash fires automatically. Do not use this mode at
situations where the flash cannot be used.
CAUTION
• When there is insufficient space on the xD-Picture Card
or internal memory for 2 shots, this mode cannot be set.
• Continuous shooting is disabled when setting .
Picture stabilization (Anti-blur)
Previous shooting mode
NATURAL & d