Filter
Top Products
110 Troubleshooting
Problems and Solutions
Problem
Problem
Solution
Solution
Pictures can not be
Pictures can not be
printed.
printed.
•
•
The camera is not properly connected
The camera is not properly connected
: Connect the camera correctly (
: Connect the camera correctly (
P
P
72).
72).
•
•
The printer is o
The printer is o
: Turn the printer on.
: Turn the printer on.
Only one copy is printed/
Only one copy is printed/
the date is not printed.
the date is not printed.
The printer is not PictBridge compatible.
The printer is not PictBridge compatible.
The camera is unre-
The camera is unre-
sponsive.
sponsive.
•
•
Temporary camera malfunction
Temporary camera malfunction
: Remove and reinsert the battery (
: Remove and reinsert the battery (
P
P
14) or disconnect and
14) or disconnect and
reconnect the AC power adapter/DC coupler.
reconnect the AC power adapter/DC coupler.
•
•
The battery is exhausted
The battery is exhausted
: Charge the battery (
: Charge the battery (
P
P
12) or insert a fully-charged spare battery
12) or insert a fully-charged spare battery
(
(
P
P
14).
14).
The camera does not
The camera does not
function as expected.
function as expected.
Remove and reinsert the battery (
Remove and reinsert the battery (
P
P
14) or disconnect and reconnect the AC power adapter/DC
14) or disconnect and reconnect the AC power adapter/DC
coupler. If the problem persists, contact your FUJIFILM dealer.
coupler. If the problem persists, contact your FUJIFILM dealer.
I want to use an AC power
I want to use an AC power
adapter and DC coupler
adapter and DC coupler
overseas.
overseas.
Check the label on the AC power adapter. The AC power adapter can be used with voltages of
Check the label on the AC power adapter. The AC power adapter can be used with voltages of
100 – 240 V. Consult your travel agent for information on plug adapters.
100 – 240 V. Consult your travel agent for information on plug adapters.
No sound.
No sound.
Turn silent mode o (
Turn silent mode o (
P
P
94).
94).
The camera does not re-
The camera does not re-
spond to the touch panel,
spond to the touch panel,
or does not perform the
or does not perform the
expected action when
expected action when
the touch panel is used.
the touch panel is used.
•
•
The touch panel requires calibration
The touch panel requires calibration
: Calibrate the touch panel (
: Calibrate the touch panel (
P
P
100).
100).
•
•
The hand that is holding the camera is touching the panel
The hand that is holding the camera is touching the panel
: Adjust your grip so that the
: Adjust your grip so that the
hand that is holding the camera is not touching the panel.
hand that is holding the camera is not touching the panel.