Filter
Top Products
6-5
Remarks
Displayed in setup mode selected by turning
power on with
MENU
pressed.
Displayed in setup mode selected by turning
power on with
MENU
pressed.
Displayed in setup mode selected by turning
power on with
MENU
pressed.
Displayed in setup mode selected by turning
power on with
MENU
pressed.
Displayed in setup mode selected by turning
power on with
MENU
pressed.
Displayed in setup mode selected by turning
power on with
MENU
pressed.
• Displayed in setup mode selected by turning
power on with
MENU
pressed.
• Setup functions allocated to
F1
,
F2
,
and
F3
buttons are always valid
regardless of this setting.
Setup item
Interface
TP_IF baud rate
RS232C baud rate
SCSI ID
Product ID
Pre-pick
Pick start time
Manual feed timeout
Paper pick retry
Paper feed retry
Function key
Setup mode lock
Description
Selects the host interface.
Selects the control data transfer rate (2400,
4800, 9600, or 19200) for the TP interface.
Selects the transfer rate (2400, 4800, 9600,
or 19200) for the RS-232C interface.
Sets the SCSI ID of this scanner.
Sets the product ID of this scanner.
Enables or disables pre-picking.
Sets the period from when paper is loaded
manually to when the pick operation starts.
Sets the waiting period from when the host
computer issues a scan command to when
paper is loaded manually.
Sets the pick motor operation time and retry
count.
Sets the feed motor operation time and retry
count.
Allocates setup functions to
F1
,
F2
,
and
F3
buttons.
Inhibits the operator panel from entering
setup mode from normal mode.