Filter
Top Products
6-11
2. Press .
The <<SETUP MODE>> menu screen (Paper
Thickness Check) appears.
3. Press
ENTER
.
The option select screen appears with the
current option OFF blinking (blinking indicates
“changeable”).
4. Press or .
The displayed option changes (ON blinks).
5. Press
ENTER
to save the change.
The LCD returns to the <<SETUP MODE>>
menu screen (Paper Thickness Check).
6. Press
CANCEL
two times.
The LCD returns to the Ready screen.
Paper thickness setup
This function sets the paper thickness which is used as the reference for detecting a double feed
error. Whether this function is enabled or disabled is determined by the “paper thickness check”
function in setup mode.
NOTE
This setting cannot be displayed in browse mode.
The following is an example of operation when you use this function.
<<SETUP MODE>>
Paper Thickness Check
Ready
Paper Thickness Check
Check: OFF
<<SETUP MODE>>
Paper Thickness Check
Paper Thickness Check
Check: ON