Filter
Top Products
6-31
2. Press repeatedly until “TP_IF Baud Rate”
appears in the lower line of the menu screen.
3. Press
ENTER
.
The option select screen appears with the current
setting 9600 blinking (blinking indicates “change-
able”).
4. Press or .
The displayed option changes (19200, 2400,
4800 ).
5. When the desired option appears, press
ENTER
to save the change.
The LCD returns to the <<SETUP MODE>>
menu screen (TP_IF Baud Rate).
6. To quit the <<SETUP MODE>>, turn off the
power.
TP_IF Baud Rate
19200
<<SETUP MODE>>
TP_IF Baud Rate
<<SETUP MODE>>
TP_IF Baud Rate
TP_IF Baud Rate
9600
RS232C baud rate
This function sets the baud rate (signaling speed) according to the baud rate of the RS-232C inter-
face. At least, set the speed slower than that of the host interface.
NOTE
You cannot use this function when the setup mode is brought by pressing
MENU
in the Ready
status.
Remarks
Unit: baud
LCD display
RS232C Baud Rate
Options
2400, 4800, 9600, 19200 (Default: 4800)
The following is an example of operation when you use this function.