Filter
Top Products
2
Chapter 2
INSTALLATION OF THE SCANNER
2.1 Installing the Scanner
Application
Both the scanner driver and image capturing application
software (called "application" hereafter) must be
installed on your PC.
Two types of drivers are available for this scanner, a
TWAIN Scanner Driver and a ISIS Scanner Driver, as
well as two software applications, ScandAll PRO Lite
and QuickScan Pro™ (Trial), are provided with this
product. The following sections describe how to install
each driver and application.
For TWAIN Scanner Driver
■
Preparation
Confirm the following items before installing the appli-
cation.
• Remove the Setup DVD-ROM from its package,
but do not insert the Setup DVD-ROM into the
DVD driver yet.
• Uninstall any older versions of TWAIN driver if
already installed.
■
Installing the TWAIN Scanner Driver
1. Turn on your PC and log on to Windows.
2. Insert the Setup DVD-ROM into the DVD drive.
⇒ <SETUP DISK START UP SCREEN> appears.
3. Click [INSTALL], and then click [TWAIN
Driver].
ATTENTION
Please install the scanner driver
before connecting the scanner to your
PC.
If you connect the scanner before
installing the scanner driver, the scan-
ner will not operate correctly.
If you have connected the scanner
beforehand, the "Found New Hard-
ware Wizard" screen appears (this
screen might differ slightly according
to the used OS) . On this screen, click
the [Cancel] button to close the
Wizard screen and install the scanner
driver first.
ATTENTION
Uninstall [Scanner Utility for Microsoft
Windows] from [Add/Remove Pro-
grams] of the control panel.
HINT
Windows XP screenshots are used in
this section as examples. The windows
and operations may slightly vary
depending on your OS.
ATTENTION
Log on as a user with "Administrator"
privileges (privileges of the adminis-
trator of your PC).
ATTENTION
This screen may not appear when the
"Autoplay" setting of your PC is OFF.
In this case, run "AutoPlayer.exe" in
this DVD-ROM directly from the
"Explorer" or "My Computer".