Filter
Top Products
8
Connection to Power (For UK)
Before Switching on make sure that the voltage of your electricity supply is the same as that
indicated on the rating plate.
Mains Cord
This appliance may be fitted with a non-
rewireable plug. If it is necessary to change
the fuse in a nonrewireable plug the fuse
cover must be refitted. If the fuse cover is
lost or damaged, the plug must not be used
until a replacement available from the
appliance manufacturer is obtained.
It is important that the colour of the
replacement fuse cover corresponds with the
rating marking on the base of the plug.
If the plug has to be changed because it is
not suitable for your socket, or becomes
damaged, it should be cut off and an
appropriate plug fitted following the wiring
instructions below. The plug removed must
be disposed of safely as insertion into a 13A
socket is likely to cause an electrical hazard.
For your own safety read the following
instructions carefully before attempting to
connect this unit to mains.
The wires in this mains lead are coloured in
accordance with the following code:
BLUE=NEUTRAL, BROWN=LIVE
Important
As the colours of the wires in the mains lead
of this appliance may not correspond with
the coloured markings identifying the
terminals in your plug, proceed as follows:
The wire which is coloured blue must be
connected to the terminal which is marked
with the letter N or coloured black.
The wire which is coloured brown must be
connected to the terminal which is marked
with the letter L or coloured red.
No connection is to be made to the earth
terminal of the plug.
If a 13 Amp (BS 1363) Plug is used, a 3 Amp
Fuse must be fitted, or if any other type of
Plug is used a 3 or 5 Amp Fuse must be
fitted, either in the Plug or Adaptor, or on the
Distribution Board.
Mains Supply:220 - 240 V 50 Hz - AC only
Do not make any connection to the larger pin
marked with the letter “E” or by the symbol
or coloured green or green and yellow.
FUSE
BLUE
(Neutral)
BROWN
(Live)
CORD GRIP
OUTER SHEATH OF THE WIRE