![](http://pdfasset.owneriq.net/2/55/25572069-f997-0c04-0526-acd50fd66be9/25572069-f997-0c04-0526-acd50fd66be9-bg1b.png)
27
the originating handset does not answer within 20 seconds, the call is
automatically dropped.
MEMORY
You may store fifty 15-character names and 20-digit telephone numbers in
the handset memory.
STORING A NAME AND NUMBER IN MEMORY
1. Make sure the phone is OFF (not in talk mode).
2. Press the MEM key to display
SELECT MEMORY 01-50
.
3. Press the desired memory location button (01 through 50) or use the
CID/VOL (/\ or \/) button to scroll to desired the memory location.
NOTE: If the memory location is occupied, the memory location number and
stored name and telephone number appear in the display. If the memory
location is empty, “EMPTY” appears in the display.
4. Press the MEM key. The display shows
ENTER NAME
.
5. Use the touch-tone pad to enter a name (up to 15 characters). More than
one letter is stored in each of the number keys. For example, to enter Bill
Smith, press the 2 key twice for the letter B. Press the 4 key 3 times for the
letter I. Press the 5 key 3 times for the letter L. Press the 5 key 3 times for
the second letter L, and press the 1 key to insert a space between the first
and last name. Press the 7 key 4 times for the letter S; press the 6 key once
for the letter M; press the 4 key 3 times for the letter I; press the 8 key for
the letter T; press the 4 key twice for the letter H.
NOTE: If you make a mistake press the DEL button to backspace and erase
the wrong character(s) or number(s).
6. Press the MEM key to confirm and save the record. The display shows
ENTER TEL NUMBR
.
7. Use the touch-tone pad to enter the telephone number (up to 20 digits,
including pauses (press #PAUSE button)), and press the MEM key again
to save the record. The unit beeps to confirm.
NOTE: The system treats PAUSES as delays or spaces in the dialing sequence.