HP (Hewlett-Packard) M525 Digital Camera User Manual


 
A
Managing batteries
Your camera uses two AA batteries, either Alkaline, Photo Lithium, or rechargeable Nickel Metal
Hydride (NiMH). Alkaline batteries provide far less battery life than either Photo Lithium or NiMH
batteries.
Top points about batteries
Fully charge NiMH batteries before using them for the first time.
Always insert the batteries in the camera correctly (see Install the batteries on page 7). If the
batteries are inserted improperly, the compartment door may close but the camera will not
operate.
If you do not intend to use your camera for more than two months, remove the batteries unless
you are using rechargeable batteries and are leaving the camera connected to an optional
dock or HP AC power adapter.
The performance of all batteries will decrease as the temperature drops. To improve battery
performance, keep the camera or batteries stored in a warm inside pocket when in a cold
environment.
Extending battery life
To conserve battery power, the Image Display turns off after a period of inactivity. Pressing any
button wakes up the camera. After five minutes of inactivity, the camera turns off.
To further extend battery life:
Set Display Brightness to Low (see Display Brightness under Using the Setup Menu
on page 31).
Set your camera to Auto Flash (see Auto Flash under Setting the flash on page 15).
Use optical zoom sparingly.
If you are turning on the camera only to view images, hold down
while turning on the
camera to start in Playback without extending the lens.
Connect the camera to the optional HP AC power adapter when you transfer or print.
Safety precautions for using batteries
Always use two identical batteries of the same chemistry, brand, and age.
Do not place batteries in fire or heat them. Always store charged batteries in a cool location.
Do not connect the positive and negative terminals of the battery to each other with any metal
object.
Do not carry or store batteries with metal objects. Do not drop batteries into a change-filled
pocket.
Do not pierce batteries or subject them to strong impacts or shocks.
Do not solder directly onto batteries.
Do not allow batteries to get wet.
Do not disassemble or modify batteries.
Immediately discontinue use of a battery if, while using, charging, or storing the battery, the
battery emits an unusual smell, feels excessively hot (note that it is normal for the battery to
feel warm), changes color or shape, or appears abnormal in any other way.
In the event batteries leak and the fluid gets into one’s eye, do not rub the eye. Rinse well with
water and immediately seek medical care. If left untreated, the battery fluid could cause
damage to the eye.
38