Filter
Top Products
Install the batteries
1. Open the Battery/Memory card door by sliding the
latch as indicated on the Battery/Memory card door.
2. Insert the batteries.
3. Close the Battery/Memory card door.
Note Turn the camera off before removing the
batteries. If using rechargeable NiMH batteries,
fully charge the batteries before using them the
first time (see Charge the batteries
on page 7).
Charge the batteries
You can charge batteries in the camera using an optional AC power adapter, in the extra
battery bay of an optional HP Photosmart camera dock or wireless dock base, or in an
optional HP Photosmart quick recharger.
Connect the optional AC power adapter to the
camera, then plug it in to an electrical outlet. If you
are using a camera dock or wireless dock base,
plug in the dock, then dock the camera.
The camera’s blinking Battery Charging light
indicates that the battery is charging (if you are
charging in an optional HP Photosmart Premium
dock or wireless dock base, the dock's Battery Charging light blinks). The battery is fully
charged when the Battery Charging light turns on solid (approximately 12–15 hours).
Turn on the camera
To turn on the camera, press the button.
Choose the language
Use to choose the language you want, then
press
.
To change the language later, use the Setup menu (see
Using the Setup Menu on page 31).
HP Photosmart M425/M525 Digital Camera 7