Filter
Top Products
Appendix B: Camera dock 65
Appendix B: Camera
dock
NOTE The Camera Dock does not work without AC power. Be
sure to use ONLY
ONLYONLY
ONLY the HP AC adapter and the cables that
came with the Camera Dock.
1 Follow the setup instructions provided with the HP Camera
Dock. This includes installing the camera Dock Insert onto
the dock, inserting rechargeable batteries in the camera,
connecting the AC power source, and connecting the
Camera Dock to a computer, printer, and/or TV.
2 Make sure your camera is set up
correctly and remove any cables that
might be attached to it before putting
it in the dock.
3 Place the camera in the HP Camera
Dock with the rear of the camera
facing the front of the Camera Dock.
The Camera Dock has three I/O connectors on the back:
—Connects to the TV
—Connects directly to HP USB
DeskJet and Photosmart printers
—Connects to your computer
There is a sliding door over the
computer and printer connectors that
prevents you from using both connectors at the same time (the
Camera Dock is not a USB hub).