Filter
Top Products
Install and format an optional memory card
This camera supports standard, high speed, and high capacity Secure Digital (SD)
memory cards, 32MB to 4GB.
1. Turn off the camera and open the
Battery/Memory Card door.
2. Insert the optional memory card in
the smaller slot as shown. Make
sure the memory card snaps into
place.
3. Close the Battery/Memory Card
door and turn on the camera.
Always format new memory cards
before first use. Formatting removes all
images from the memory card, so
make sure to transfer existing images
before formatting (see Transferring and printing images on page 32).
1. With the camera turned on, slide
to .
2.
Press
.
3.
Use
to select Format Card, then press .
4.
Use
to select Yes, then press to format the card.
Note Once you install a memory card, all new images and video clips are stored
on the card, rather than in internal memory. To use internal memory and view
images stored there, remove the memory card. To transfer images from internal
memory to an optional memory card, see Move Images to Card under Using the
Playback Menu on page 26.
For information about supported memory cards, see Storage under Specifications
on page 52.
Install the software
The HP Photosmart Software provides features for transferring images and video clips
to your computer, as well as features for modifying stored images (remove red eyes,
rotate, crop, resize, adjust image quality, and more). See the Help feature in the HP
Photosmart Software.
To install the HP Photosmart Software, your computer must meet the system
requirements as stated on the camera packaging.
To learn about Windows Vista support for your camera,
see www.hp.com/go/windowsvista (English only).
1. Close all programs and temporarily disable any virus protection software.
2. Insert the HP Photosmart Software CD into the CD drive and follow the on-screen
instructions. If the installation screen does not appear, click Start, click Run, type
D:\Setup.exe, where D is the letter of your CD drive, then click OK.
3. When the software has finished installing, re-enable virus protection software.
Note If you have trouble installing or using the HP Photosmart Software, see
the Hewlett-Packard Technical Support website for more
information: www.hp.com/support.
HP Photosmart R837 Digital Camera 9