HP (Hewlett-Packard) PJL Photo Scanner User Manual


 
EN Factory Default Environment 3-3
PAGE CONTROL FONT MANAGEMENT
Print Direction Font ID
Orientation
2
Character Code
Page Size
2
Symbol Set ID
Paper Source RASTER GRAPHICS
Vertical Motion Index
2
Left Graphics Margin
Horizontal Motion Index
2
Resolution
Top Margin Compression Mode
Text Length Raster Height
Left Margin Raster Width
Right Margin Raster Graphics Presentation
Mode
Perforation Skip PICTURE FRAME
Line Termination Picture Frame Width
PRINT MODEL Picture Frame Height
Current Pattern Picture Frame Anchor Point
Source Transparency Mode HP-GL/2 plot Horizontal Size
Pattern Transparency Mode HP-GL/2 Plot Vertical Size
Pattern Reference Point MACRO
Pattern Rotation Macro ID
1. The font characteristics are determined by the default font. The default font can
be the factory default font or the user-selected default font from the printer’s
control panel or from a font cartridge containing a default font.
2. User default values may be selected by the user from the printer’s control panel
for these items.
3. Selectable from the printer control panel if duplex is selected.
4. Selectable from the printer’s control panel if a fixed-space scalable font has been
selected as the user default.
5. Selectable from the printer’s control panel if a proportional scalable font has been
selected as the user default.
Table 3-1 Factory Default Print Environment Features –
PCL Context (continued)