Filter
Top Products
24 HP PhotoSmart S20 Photo Scanner Basics
Manually Ejecting Photographs
You can manually eject a photograph from the S20 photo scanner at any time during
the scanning process. To do so, simply press the Stop/Eject button, as shown:
•
If you press the Stop/Eject button while a photograph is moving into the photo
scanner, the photograph will stop moving. You must press the button again to eject
the photograph.
•
If you press the Stop/Eject button while a photograph is being scanned, the
scanning will stop and the photograph will be ejected.
If your photograph does not eject from the photo scanner after you press the Stop/
Eject button several times, you will need to open the photo scanner lid and remove the
photograph, as follows:
1. Hold the bottom of the photo scanner with one hand and pull up on the photo
scanner lid with your other hand.
2. Open the photo scanner lid carefully about 2 inches and then remove your
photograph. Be sure you do not touch any of the glass windows inside the
photo scanner.
Stop/Eject button