English
141
●DVD-MovieAlbumSE
You can read the instruction manual using either
of the following procedures:
• Open the PDF file in
DVDMASE 4\manuals\English folder
contained on the provided CD-ROM.
• After installing DVD-MovieAlbumSE, open
“Programs”or “All Programs” from the
Windows “Start” menu, choose “Hitachi
DVDCAM” and “DVD-MovieAlbumSE”, and
then open “Instruction Manual”.
●DVDfunSTUDIO
• After installing DVDfunSTUDIO, open
“Programs” or “All Programs” from the
Windows “Start” menu, choose “Hitachi
DVDCAM” and “DVDfunSTUDIO”, and then
open the electronic instruction manual in
“Document” folder.
To read the above manual, you will need Adobe
Acrobat Reader.
If Adobe Acrobat Reader has not been installed
in your PC, start AcrobatReader\English
\AR500ENU.exe on the provided CD-ROM to
install it.
●UDF driver (DVD-RAM driver)
• After installing the UDF driver (DVD-RAM
driver), open “Programs” or “All Programs”
from the Windows “Start” menu, choose
“DVD-RAM” and “DVD-RAM Driver”, and
then open “How to use DVD-RAM disc”.
●Requirements of available PC
• The provided software cannot be used on Windows
®
98 or Windows
®
98 Second Edition.
• OS: Windows
®
Me / 2000 Professional / XP
• Computer: IBM PC/AT compatible
• CPU: Intel
®
Pentium
®
III 800 MHz or higher (Pentium
®
4 1.8 GHz or higher is recommended)
Operation with Pentium compatible CPU other than those produced by Intel
®
/AMD
®
may not be
supported.
• Memory: At least 256 MB (512 MB or more is recommended)
• Free space on hard disk: At least 400 MB (does not include capacity needed to copy or edit video or
photo data)
• CD-ROM drive (used to install software)
• Display adapter (video memory of at least 4 MB) and display that can display at least 1024 × 768
pixels and 65,536 colors (16-bit colors), and is compatible with DirectX
®
8.1 or higher.
• DirectSound
®
compatible sound card
• USB: One unused port is necessary for this product (USB2.0 port is recommended)
Note:
• Operation is not guaranteed in the following cases:
- Using PC with OS other than Windows
®
Me / 2000 Professional / XP installed
- When operated on Pentium
®
compatible CPU other than those produced by Intel
®
or AMD
®
- When connected via USB hub
• Multiprocessor is not supported.
• Even when your PC satisfies the above conditions of available PC, malfunction may result or restriction in use
may occur, depending on the combination of other software in PC or peripheral devices.
Read the electronic instruction manuals on PC for complete information on using each software program.