Filter
Top Products
English
37
SETTING DATE AND TIME
Set the current date and time so that the date and time you make a recording can be recorded
correctly.
The following procedure can also be used to correct the date and time you have already set.
1 Turn the DVD video camera/recorder on.
2 Press the MENU button.
The menu screen will
appear.
3 Use the f/e/d/
c buttons to choose
“Date Setup” and then
“Date Set”.
4 Press the c button.
The figure for the
month will be selected.
[The digit that is
highlighted first
depends on the date
display format (set up in Date Mode): The
digit on the left end of the date display will
be first highlighted.]
Note:
After setting the figure for the month, press the c
button to right to select the digit to be set. If you
press the A button after selecting the figure for
the month, the screen for verifying the set date will
appear instead of screen for setting day, year or
time.
5 Press the d or c
button to select the digit
you want to set in
sequence.
Press the f or e
button to select the
number for current date/time, and then
repeat step 5 to set the current date and time.
Note:
To stop date/time setting midway, press the C
button.
6 After setting the current
date and time, press the
A button.
The screen for verifying
the set date will appear.
7 If the displayed date and time are correct, use
press the d button to choose “YES”, and
then press the A button.
The date and time will be set, and the DVD
video camera/recorder will enter the
recording pause status.
Choosing “NO” will restore the menu screen.
Note:
This DVD video camera/recorder incorporates a
rechargeable battery to store the date and time in
memory. If this built-in battery is exhausted, the date
and time will be reset. To prevent this, connect the AC
adapter/charger to DVD video camera/recorder every 3
months, and leave them for at least 24 hours with the
DVD video camera/recorder turned off: The built-in
battery will be charged.
MENU
Use f / e / d / c buttons
to select, and then press A to
designate.
Ca
m
era Functions Setup
Progra
m
AE : Auto
W
hite Bal. : Auto
Dig.Z
oom
: 40x
M
IC.Fi lter :
O
ff
EIS :
O
n
ENTER RETURN
RAM
Da te Se tup
RAM
Date Mode
Date Set 1/ 1/2005
ENTER RETURN
12:00A
M
RAM
Date Mode
ENTER RETURN
Date Set 1/ 1/2005
12:00A
M
Da te Se tup
RAM
8:00AMDate Mode
ENTER RETURN
Date Set 9/30/2005
Da te Se tup
ENTER
RAM
9/30/2005 8:00A
M
Date set up?
YES NO
Da te Se t