Hitachi DZMV730A Digital Camera User Manual


 
English
33
INSERTING BATTERY INTO REMOTE CONTROL
Insert the provided lithium battery into remote control.
1 While inserting a fine rod into the hole
marked PUSH, pull the battery holder out
forward.
2 Insert the lithium battery with the positive R
terminal facing down.
3 Slide the cover to close it.
Note:
The life of lithium battery is approximately one year. If
the battery is discharged, no operation is possible with
remote control: Replace the battery.
REMOVING BATTERY FROM REMOTE CONTROL
1 While pushing the battery holder, slide the
battery out.
Warning:
KEEP THE BATTERY AWAY FROM CHILDREN AND
PETS.
IF SWALLOWED CONSULT A PHYSICIAN
IMMEDIATELY FOR EMERGENCY TREATMENT.
BATTERY MAY EXPLODE IF NOT HANDLED
PROPERLY. DO NOT RECHARGE, DISASSEMBLE
OR DISPOSE OF IN FIRE.
Note
:
Replace the battery with a Hitachi Maxell, Sony,
Panasonic, Sanyo, Toshiba CR2032, or Duracell
DL2032. Use of another battery may present a risk of
fire or explosion.
Dispose of battery safely in accordance with local
laws. Do not dispose of in fire.
Do not short circuit the battery.
Do not hold the battery with the metallic tweezers.
Keep the battery in a dark, cool, dry place.
The remote control (DZ-RM4W) and lithium battery
(CR2032) are supplied only with the DZ-GX20A and
DZ-MV780A.
Battery holder