Filter
Top Products
English
174
Disc error. • Use another disc.
• See *3 on page 177.
25, 27
• Mismatch in recording information may be caused by editing
done on some device other than this DVD video camera/
recorder.
Initialize the disc or use another disc.
• Initializing the disc will erase all data on it.
135
Disc full. Cannot
execute.
Delete unnecessary scenes before using this disc, or use another
disc.
113
Disc has no data. This message will appear when an attempt is made to execute
playback or editing on Disc Navigation with no scene recorded.
—
Disc has no Play List. Switching of play list was selected with no play list stored. 128
Disc includes protected
scenes. Delete scenes?
The disc may be software protected from a device other than this
DVD video camera/recorder. To release this case, use a device
that has executed software-protect.
—
Disc is full. Cannot add
control info.
The number of entered scenes has reached the limit that can be
entered, so the control information for generating thumbnails
cannot be added.
Combine several scenes or delete them.
113, 116
Disc is not formatted.
Format the disc now?
• Has the disc been initialized on a PC?
Choose “YES” and initialize the disc when using it on this DVD
video camera/recorder. Initialization will delete all data on the
disc.
• See *2 on page 177.
135
Drive overheat. Please
retry later.
The temperature inside the DVD video camera/recorder is too
high, and reading or writing of the data on disc may not be
performed normally.
Turn the DVD video camera/recorder off and wait for a while. The
temperature will be effectively decreased if the DVD video
camera/recorder is placed in a well-ventilated spot.
45
DVD-R* Disc, 16:9
mode cannot be
changed when Video
mode is STD.
With DVD-RW (VF-mode)/DVD-R disc, the setting of 16:9 mode
will not be possible when the Video mode is STD.
* “DVD-RW (VF)” will appear when using a DVD-RW (VF-mode).
96
DVD-R* Disc, Input
Source cannot be
changed.
Once a DVD-RW (VF-mode)/DVD-R disc has been recorded in
the 16:9 mode, the input source will not be changeable.
* “DVD-RW (VF)” will appear when using a DVD-RW (VF-mode).
96
DVD-R* Disc, Video
mode and 16:9 mode
cannot be changed.
With DVD-RW (VF-mode)/DVD-R disc, the movie quality mode
and 16:9 mode once used for recording cannot be changed.
* “DVD-RW (VF)” will appear when using a DVD-RW (VF-mode).
29, 96
END OF DISC The disc is full.
You cannot record on this disc anymore. Prepare another disc or
delete unnecessary movie scenes from this disc.
113
End scene cannot be
divided.
Division is not possible at the end of scene.
115
Error occurred. Please
replace disc or format
disc.
• Abnormality has occurred with the DVD-RAM disc to be
repaired. Initialize the disc before using it, or use the another
disc. Initializing the disc will erase all data on it.
• See *2 on page 177.
135
Message Cause & Troubleshooting
Reference
page