Filter
Top Products
English
158
Cannot combine scene
of multiple programs.
Create Playlist first, and
then combine scenes.
Scenes in different programmes (different recording dates)
cannot be combined. Create a Play list first, and then combine
such scenes on the play list.
110
Cannot combine.
Deselect PHOTO
scenes.
Select only movies and combine them.
110
Cannot combine. Select
multiple scenes.
Select a range of at least 2 scenes to be combined, and then
combine them.
110
Cannot delete scenes. This may occur when scene that was edited for division, etc. is to
be deleted.
Combine the divided scenes, and then delete them.
107, 110
Cannot execute.
Change display
category to ALL.
This message will appear if you attempt to combine or move
scenes with “Category: VIDEO or PHOTO” specified. 133
Cannot execute.
Unselect multiple
scenes.
Division or change in thumbnail was executed when multiple
scenes were selected. 103
Cannot read disc.
Check dirt/crack/both-
sides contrary/inserted
correctly.
Error occurred while the disc was being recognised. Make sure
that there is no scratch or dirt on disc, that the surface/back of
disc is not reversed, and that the disc is firmly pushed against the
turntable. See *3 on page 163 for troubleshooting.
7, 29, 48
CANNOT RECORD
PHOTOS
Are you using DVD-R disc? You cannot record still image on
DVD-R disc (recordable of still images from PC). Use DVD-RAM
disc to record still images.
27
Cannot replace
thumbnail on PHOTO
scenes.
The thumbnail of a still cannot be changed.
Select a movie. 113
Cannot select any more
scenes.
The maximum number of selectable scenes is 999.
116
CARD ALMOST FULL Remaining space is only enough to record less than 10 stills.
Delete unnecessary stills and try the card, or use another card.
32, 107, 130
Card error has
occurred.
Format the card now?
Was the card formatted on PC? Was formatting interrupted
midway? When using the card on this DVD video camera/
recorder, choose “YES” and format it.
129
Card error has
occurred.
Formatting is not
complete.
The card may be damaged: Use another card.
30
Card error. • The card terminals may be dirty: Wipe off dirt, and try the card
again, or use another card.
• Data other than still image may be included: Use another card.
30
Card error has
occurred. Keep card
inside & restart.
Card error could have occurred during editing of scenes. Turn off
the DVD video camera/recorder with the card being used inside,
connect the AC adapter/charger, and then power the DVD video
camera/recorder again. Repair of scenes will be attempted.
46, 47
Message Cause & Troubleshooting
Reference
page