Filter
Top Products
19
Tripod mounting
Use the accessory TA-Z3 tripod adapter to mount
the camera on a tripod.
1.
Securely attach the tripod adapter to the tripod.
Shift the adapter screw position to obtain the
best balance. The adapter can accept two
types of screws. Use the screw hole that
matches the tripod.
2.
Secure the camera on the tripod adapter.
Align the hooks of the camera and adapter,
then turn the lock lever in the direction
indicated by the arrow. A click sound can be
heard at the locked position.
3.
Slightly loosen the tripod screw and again
check the balance. Shift the adapter to the
optimum position and securely tighten the
tripod screw.
Detaching
Press the red lock pin and turn the lever in the
arrow direction. Remove the camera
CAUTION
1
．
The weight can exceed 5 kg with the lens and
10 kg with a VTR. Use a sturdy tripod that can
support more than 10 kg. A large size tripod
can provide both stability and smooth operation.
2
．
A screw hole is located near the camera tripod
adapter hook. Do not use this hole for
attaching to the tripod. There is risk of
dropping.