Hitachi V-21 Digital Camera User Manual


 
46
Setup card
Setup card data operation
The Memory Card page of the setting menu is used
for storing and retrieving setup card data.
Note
The Memory Card page cannot be used during
camera control panel operation.
Saving data to card
1.
Insert the setup card and press the Function
button.
2.
The following Setup Card page is displayed.
3.
Shift the cursor to the desired File No. with the
buttons.
4.
Press the button to display the following
message.
5.
If the File No. is correct, press the button for
Yes. If incorrect, press the
button for
Cancel, then set the correct File No.
The following message is indicated at the
completion of save. Press the button to
return to the Memory Card Top menu, then
press the Function button to exit the menu.
If Save Error is displayed, the data were not
stored. The card could possibly be defective.
After replacing the card, if Error still occurs,
consult for service.
Retrieving data from card
1.
Insert the setup card and press the Function
button.
2.
The Setup Card page is displayed.
3.
Press the
keys to position the cursor
to the desired File No. for readout.
4.
Press the button to display the following
message.