Filter
Top Products
42
Scene file
When taking scenes having different conditions, the settings need to be optimized for each scene. The scene file
function enables setting the conditions for each scene beforehand and storing them in memory for instant recall at
the required time. The 4 scene files can be used for storing 4 sets of scene conditions.
File storage items
Type
Item
Details
CONTRAST OFF, NORM,
HIGH
AUTO IRIS AVERAGE, PEAK
GAIN LOW -3,0dB
2a GAIN MID +6,+9,+12dB
GAIN HIGH +12,+18,+24dB
MASKING OFF, PRESET,
MEMORY
GAMMA OFF, PRESET,
MEMORY
DTL LEVEL OFF,-128,....+127
DTL FREQ SOFT,
STANDARD,
SHARP
FLESH TONE GAIN -128,....+127
FLESH TONE PHASE -128,....+127
FLESH TONE WIDTH -128,....+127
2b White balance data
(each filter)
(Remote mode)
2c SHUTTER SELECT 1/100,1/250,...
Var, AES, CC FRM
Setting steps
1.
Select the file number with the Scene File switch
(adjust camera to the status previously stored in the memory).
2.
Set the file storage items
(if changing the memory contents).
a Set the Function 1 page items from the setting menu.
(See page 45.)
b Operate auto white balance and store the adjustment in memory
(one memory is provided for each of the 4 filters).
(See page 39.)
c Set the shutter and store the setting in memory.
(See page 41.)
Note) Data are stored in the selected file simultaneously with setting.