Filter
Top Products
ATTACHING THE DC CAMERA LIGHT (Optional Accessory)
80
4. Place "POWER" switch to "CAM" and then press the "POWER" button of the DC
camera light when required.
NOTE: Turn on the camera light only when you need it. Otherwise the operation time of the
battery pack becomes shorter because the power consumption of the camera light is high.
5. To remove the camera light, slide the camera light to the direction of arrow while
pressing the lock button.
NOTES:
• Replace only with the VM-CP10L lamp (optional), to reduce the risk of fire.
• When the camera light is on, do not allow water to drop on the light.
• When the camera light is on, avoid subjecting the camera light to impacts or sharp
vibrations.
• Do not allow the cooling vents to become blocked. Also, do not cover the camera light
with paper or other objects, since the air flow will be interrupted, resulting in possible
overheating hazard.
• Never use the camera light in the vicinity of explosive or highly inflammable materials.
• When storing the camera light in the camera case following use, be sure to allow it
sufficient time to fully cool down before placing it in the case.