Filter
Top Products
ATTACHING THE DC CAMERA LIGHT (Optional Accessory)
81
To remove and replace the front case of DC camera light
To remove the front case, press and hold the tab, then remove the front case.
To replace the front case, pass the lamp through the hole of the reflection plate then
attach the upper hooks to the DC camera light, and then attach the lower hook to the
DC camera light while pressing the tab.
NOTES:
• Do not touch the lamp directly with your fingers. It may shorten its service life.
• When the lamp is replaced, or when the front case of the camera light is removed, make
sure the front case is attached to the camera light properly.