Hitachi VM-H100LA Camcorder User Manual


 
Advanced Techniques - 37 -
Using Quick Edit
Use quick edit to search for the end of previously recorded material, find a particular spot on your tape, begin
editing, or record new material. While the camera is in record/pause mode hold down the fast forward
, rewind
, or play button and visually search the tape. Release the button and the camcorder stops the tape at the
exact position you selected.
Using the Wireless Remote Control
Use the wireless remote control to operate the camcorder from a distance. The PLAY ( ), F.FWD ( ), REW
(
), STOP (), PAUSE (START/STOP), VOL / (VOLUME) and ZOOM buttons on the wireless remote
control operate the functions of the corresponding buttons on the camcorder. Aim the wireless remote control at
the infrared ray receiver of the camcorder.
Note: Use the wireless remote control within the range of the infrared ray receiver of the camcorder shown
above.
Note: The wireless remote control may not function in strong light such as direct sunlight or very bright
artificial lighting.
Note: Clear a direct path from the wireless remote control to the infrared ray receiver. The wireless remote
control won't work if an obstacle blocks the infrared rays.
Note: The remote control code of this camcorder is Hitachi code VCR2. If you have a VCR with the same
code you Hitachi VCR may malfunction when you use the camcorder's wireless remote control.
Memory Feature