Honeywell HD3MDIH Security Camera User Manual


 
30
Installing the Honeywell IP Utility and Web-Client Software
About the Web-Client
The Web-Client is the web-based application that enables users to:
View live-streaming video.
View the device network settings and firmware details.
Configure camera settings
Configure video analytics settings.
Configure compression settings.
Configure alarm and audio settings.
User Profiles: Honeywell IP Utility and Web-Client
Both the Honeywell IP Utility and the Web-Client have two user types: Administrator and
Guest as described in Table 3-1.
Note Only one user, an Administrator or a Guest, can be logged on at a time.
After the IP Utility software is installed, you can change the Administrator or Guest
passwords.
Table 3-1 User Profiles for Honeywell IP Utility and the Web-Client
Interface Administrator Guest
Honeywell IP
Utility
View the list of available network devices
and connect to the devices.
Configure the IP network settings.
Upgrade firmware.
Change the password to access the IP
Utility application.
Change the access passwords to the
Web-Client application.
View the list of devices available on the
network.
View system settings including device
name, IP address, and MAC address.
Web-Client View video and network settings.
Configure compression settings.
Configure camera setup.
Configure video analytics.
Configure audio and alarms.
Guest users are limited to the Live View
tab where they can view video