Honeywell HD3MDIH Security Camera User Manual


 
Document 800-07361 Rev A 69
12/10
C
Specifications
Note These specifications refer to all models, except where otherwise noted.
Specifications are subject to change without notice.
Video Signal Specifications NTSC PAL
Scanning System: Progressive
Image Sensor: 1/4” CMOS
Number of Pixels (H x V): 1280 x 720 (HD); 640 x 480 (VGA)
Minimum Illumination: 1.0 lux color @ 50 IRE, F1.2
Video Output (local): 1.0 Vp-p @ 75 Ohms
S/N Ratio: 50 dB or more (AGC Off)
Auto Gain Control (AGC): Off/On, selectable (20 – 40 dB)
Auto Electronic Shutter (ELC): 1/60 – 1/100,000 sec 1/50 – 1/100,000 sec
Automatic Lens Iris Control: DC Iris level 1 – 25
White Balance (AWB): AWC, MWB (Manual Mode), AWC Push
Lens Type: 3.3 mm to 12.0 mm Vari-focal Auto Iris, F1.6
Audio Signal Specifications
Audio/Two-Way: Line in/out
Electrical Specifications
Input Voltage: 24 VAC, PoE IEEE 802.3af
Input Voltage Range: 17 – 28 VAC
Surge Suppression: 1.5 kW transient
Power Consumption: 5 W (max)
Mechanical
Dimensions (WxH): See diagrams (Figure C-1, Figure C-2, Figure C-3,
Figure C-4)
Weight: 1.5 lb (0.68 kg) camera only
Construction: Housing: Polycarbonate
Finish: Matte texture, Off-white
Connectors: Local Video Output: 2-pin Molex connector
Power Input: Removable screw block
Alarm I/O: Removable screw block
Audio I/O: Removable screw block
Network: RJ45 connector