Filter
Top Products
13
Recharging the Battery with the USB Port of your PC:
1. Switch off the camera.
2. Connect the camera to the USB Port on your PC with the USB cable (included). The charging
indicator will light red.
3. After a period of time, the charging indicator will turn off. That means the battery has been fully
charged.
4. Disconnect the camera from your PC and then remove the USB cable.
Note:
1. The camera will be switched off automatically for battery charging if the USB cable from PC is
inserted when the camera power is on.
2. Please fully recharge the built-in battery for up to 10 hours before you use the camera for the
first time after purchase. The internal battery should last for the life of the camera, but as is the case
with all rechargeable batteries the actual charge held may decline with use.
Camera Mode Selection
Turn on the camera, press “Mode” button to the main menu of camera.
User can select the mode of camera for “Photo Snapshot”, “Video Recording”, “Photo & Video Playback”
and “Camera Configuration”.