Filter
Top Products
action. 5 alarm actions, 1 periodic FTP assigned to No.6, 1 pre/post FTP assigned to No.7, and 1 SD Card
constant recording assigned to No.8, and SD Card alarm recording assigned to No.10 are available, so alarm
action number can be 1 to 8 and 10. Note that alarm numbers are different from the alarm input pin numbers.
Either on or off will be returned.
Specify "on", "off" or "restart". By "restart", changes to alarm action and alarm trigger are enabled. By "on" after
"restart", the alarm action starts working with the changed settings. If "restart" is not set after changes to alarm
action and alarm trigger, APIs to get settings of alarm action and alarm trigger return previous values.
Allowed users admin, operator
Getting Alarm Action
Format /api/param?application.event(Number).action
Example When Getting action of alarm action No. 1
/api/param?application.event(1).action
Example of Response
application.event(1).action=mailto/somebody@somecompany.com/none/Message&200 OK
Interpretation Acquire the alarm action of the specified alarm action number. 5 alarm actions, 1 periodic FTP
assigned to No.6, 1 pre/post FTP assigned to No.7, 1 SD Card constant recording assigned to No.8, and 1 SD
Card alarm recording assigned to No.10 are available, so alarm action number can be 1 to 8, and 10. Note that
alarm numbers are different from the alarm input pin numbers. A separate API
(/api/param?application.event(Number).status) is used to acquire the on/off status of the alarm action.
When no action is specified, response below is returned.
Example of Response application.event(1).action=&200 OK
When sending mail is specified, mailto, mail address, JPEG attaching and the character string to be sent will be
returned. When spaces are included in the character string, the character string with spaces will be returned.
Segments are indicated by /. If JPEG attaching is on, "object(Number)" is returned, and if JPEG attaching is off,
"none" is returned.
Example of Response
application.event(1).action=mailto/somebody@somecompany.com/object(1)/Message&200 OK
When sending via TCP is specified, tcpto, IP address, port number and the character string to be sent will be
returned. Segments are indicated by /. If JPEG attaching is on, "object(Number)" is returned, and if JPEG
attaching is off, "none" is returned.
Example of Response application.event(1).action=tcpto/10.0.0.100/20000/object(1)/Message&200 OK
When sending via UDP is specified, udpto, IP address, port number and the character string to be sent will be