JVC 257VP Security Camera User Manual


 
30.1. Procedures
1) The client establishes a TCP connection to port number 80.
2) The client sends out API.
API has following structure.
Refer to Section 5 on details of the Accept and Authorization lines.
The API characters are as follows.
/api/receive?from=network&from.ip=data1&from.protocol=tcp_passive&from.ip_translate=on&to=audio
Example
/api/receive?from=network&from.ip=10.0.0.100&from.protocol=tcp_passive&from.ip_translate=on&to=audio
Specify the client IP address for from.ip=. When from.ip_translate is set to off, the camera will standby to receive
audio data from the IP address specified at from.ip. When from.ip_translate is set to on, the camera will ignore
from.ip and standby to receive audio data from the source IP address of this API.
2) The camera returns a response.
HTTP/1.1 200 OK<CRLF>
Connection: Keep-Alive<CRLF>
Content-type: text/plain<CRLF>
Date: Fri, 13 MAY 2005 07:33:12 GMT<CRLF>
Server: VN-H57 Network Camera/1.0.0<CRLF>
x-vnh57_response:
from=network&from.ip=10.0.0.100&from.protocol=tcp_passive&from.ip_translate=on&to=audio<CRLF><CRLF>
200 OK<CRLF>
The client may disconnect the TCP80 at this point of time.
3) The client establishes a TCP connection to port number 49298.
the camera
User Name and Password