Filter
Top Products
46 EN
IC FILMCLASS
SEPIA
GHTT
W
ILI
ONEMONOT
SNO
W
SSPORT
GIHTSPOTL
ESTROB
4
SL XO
W
10
SL XO
W
ERSHUTT
1/100
P
L
A
Y
O
F
F
FOR RECORDING
(cont.)
Program AE With Special Effects
1
Set the Power Switch to “ ” while pressing down
the Lock Button located on the switch. Open the
LCD monitor fully or pull out the viewfinder fully.
2
Press the MENU Wheel in. The Menu Screen
appears.
3
Rotate the MENU Wheel to select “ PROGRAM
AE”, then press it. PROGRAM AE Menu appears.
4
Rotate the MENU Wheel to select the desired mode
(੬ pg. 47), then press it. Selection is complete.
Press the MENU Wheel in again. The Menu Screen
closes.
5
Press PROGRAM AE.
•The selected mode indicator appears.
To Deactivate The Selected Mode . . .
...Press PROGRAM AE again so that the mode indicator
disappears.
NOTES:
●
Program AE with special effects can be changed during
recording or during Record-Standby.
●
Some modes of Program AE Special Effects cannot be
used during Night-Alive (
੬
pg. 45).
MENU Wheel
Power Switch
IMPORTANT:
Some modes of Program AE with special
effects cannot be used with certain Fade/Wipe
Effects (
੬
pg. 48, 49). If an unusable mode is
selected, its indicator blinks or goes out.
Display
PROGRAM AE
Menu
Lock Button
PROGRAM AE Button
GR-DVM75 only